World beating, best in class, eleven year manufacturer defect warranty.

Powers all 12V electronics. Powers trolling motors 45 lbs of thrust or less. Optimal run time at 30 lbs of thrust is 100 min - 150 min depending on motor setting.

50 Ampere hours (Two 12.8V batteries to be wired in parallel). Dakota Lithium batteries provide consistent power for all 50 Amp hours. DL LiFePO4 batteries have a flat voltage curve, which means they have a steady power output as the battery discharges. The power output will not dramatically drop like similar sized SLA batteries. You get all the juice down to the last drop.

300 cold cranking amps, suitable for ATVs, UTVs, generators and small engines

12.8V

300 Watt-hours (Wh) per battery

M6 terminals (posts that screw in). When used in salt water environments we recommend applying a small amount of dielectric grease on the threads of each terminal. It helps extend the lifespan. (Recommended Torque 5 ft lbs, Max Torque 9 ft lbs)

7.125"x 3.03"x 6.69" (181mm x 77mm x 170mm)

6.4 lbs (2.9Kg). That's 60% lighter than a SLA battery.

Up to 80% capacity for 5,000 cycles in recommended conditions. The typical SLA has 500 cycles. Dakota Lithium batteries last so long that the price per use is a fraction of traditional batteries.

Ideal for rugged & harsh environments. Much better than SLA or other lithium’s. -20°F min, +120°F max optimal operating temps (battery performs well down to -20°F). Avoid charging below 32°F.

300 cold cranking amps, suitable for ATVs, UTVs, generators and small engines

30A max, 14.4V recommended, 15V max. Please note: this battery should be charged using a LiFePO4 compatible charger. A SLA charger may work, but will reduce performance and lifespan of the battery. Can be charged by ATV, UTV or powersports engine alternator (<30A output).

Contains a circuit that handles cell balancing, low voltage cutoff, high voltage cutoff, short circuit protection and high temperature protection for increased performance and longer life.

This battery should be charged using a LiFePO4 compatible charger. Dakota Lithium 12V batteries should be charged at 14.4 volts, higher than AGM or lead acid. Lead acid chargers will work, but will only charge the battery to 80% of capacity.

All batteries are UN38 certified. Dakota Lithium's cells are UL1642 certified and have been tested per IEC62133 standards. Meets all US & International regulations for air, ground, and train transport.

Dakota Lithium is certified by ISO 9001:2015 for lithium battery engineering, manufacturing, and quality control. This means that the battery systems available at Dakota Lithium are designed and manufactured to the highest ISO 9001:2015 engineering standards. In addition, quality control is completed by our US based engineering team and follows ISO 9001 standards. This added layer of safety, quality, and reliability ensures that your battery will last a long, long time.