Designed for charging compatible 24V LiFePO₄ batteries, this charger provides a 28.8V, 10A output and supports 100–240V AC input.
Description
Designed for charging compatible 24V LiFePO₄ batteries, this 10A charger provides a simple charging solution for marine, trolling motor, mobility, and other 24V lithium applications.
The charger provides a 28.8V, 10A output and can be used with compatible 24V LiFePO₄ battery systems, including appropriately configured series-connected batteries.
Charging time will vary based on battery capacity and state of charge. Always confirm that your battery’s published charging specifications are compatible with the charger before use.
Technical Specifications
-
For 24 volt lithium batteries:
We highly recommend you use a LiFePO4 compatible charger. 24V chargers for lead acid batteries may work, but will decrease performance and lifespan of the battery.
-
Charger rating:
INPUT 100-240 volts, 50/60HZ. OUTPUT: 28.8 volts, 10 amps
-
Terminal Connections:
Alligator clips make it easy to connect your charger to the battery. Clip black to your black terminal. Red to your red terminal. Do not short circuit. Red light on the charger will turn on when charging. Light turns green when the battery is full.
-
Smart BMS communication:
Charger will restart or "wake up" a Dakota Lithium BMS that has turned off a battery due to short circuit or excessive amp draw. Simply connect the charger to the battery to initiate a restart.
-
What voltage should LiFePO4 batteries be charged at?:
28.8 volts is recommended for 24V Dakota Lithium (LiFePO4) batteries. This charger charges at 28.8 volts.