Name: 48V 22A Onboard LiFePO₄ Battery Charger
Brand: Dakota Lithium
SKU: DL20-48v22a-onboard
Price: 299.00 USD
Availability: InStock

48V 22A Onboard LiFePO₄ Battery Charger

$299.00

48V 22A Onboard LiFePO₄ Battery Charger

DL20-48v22a-onboard

The Dakota Lithium 48V 22A Onboard LiFePO₄ Battery Charger is built to charge large 48V lithium batteries quickly without sacrificing battery lifespan. Its rugged, high-tensile aluminum housing, IP67 waterproof and dustproof construction, and plug-and-play Anderson connection make it well suited for marine, off-road, and other demanding environments.

$299.00

Fast, Rugged Charging for Large 48V Lithium Batteries.

Built specifically for LiFePO₄ (LFP) batteries, this 48V Dakota Lithium charger delivers an ultra-fast 22A output for large 48V battery systems. The high-tensile aluminum housing supports rapid heat dissipation, while the fully sealed IP67 design stands up to wet, dusty, marine, and off-road environments.

An included Anderson connector and ring terminals make setup simple. Install the ring terminals using the bolts on your battery terminals, connecting black to black and red to red. Do not short circuit. Connect the charger through the Anderson plug when charging is needed. The LED displays red while charging and green when the battery is full.

A LiFePO₄-compatible charger is highly recommended for 48V lithium batteries. Lead-acid chargers may work, but can reduce battery performance and lifespan. This charger is not designed for lead-acid batteries or smaller battery packs.

Specifications
Charger Type	Onboard
Charging Profile (Battery Chemistry)	LiFePO4
AC Input	100–240VAC, 40–70Hz
DC Output	57.6VDC, 22A
AC Connection	Standard 120V AC Plug
DC Connection	Anderson connector + M8 ring-terminal adapter cable

Dimensions
Length	10.99 in
Width	6.58 in
Height	3.78 in
Weight	9.9 lb

Certifications
IP Rating	IP65

Disclaimer
Low-Voltage Recovery	When first connected to AC power, the charger briefly applies charging voltage for approximately 10 seconds to help wake a lithium battery that has entered low-voltage BMS protection. After this startup period, the charger enters its normal battery-detection mode and will only charge when a compatible battery is properly detected.
Important	Always verify correct battery polarity before connecting the charger. Reverse-polarity protection is not active during the initial low-voltage recovery period.