Dakota Lithium 12v 10Ah Battery

World beating, best in class, eleven year manufacturer defect warranty.

5.94"L x 2.55"W x 3.78"H (151mm x 65mm x 96mm) Replaces UB1280 battery

2 lbs 12.32 oz (1.25 Kg). That's 60% lighter then a SLA battery.

10 Ampere hours. Dakota Lithium batteries provide consistent power for all 10 Amp hours. DL LiFePO4 batteries have a flat voltage curve, which means they have a steady power output as the battery discharges. The power output will not dramatically drop like similar sized SLA batteries. You get all the juice down to the last drop.

Up to 80% capacity for 5,000 cycles in recommended conditions. The typical SLA has 500 cycles. Dakota Lithium batteries last so long that the price per use is a fraction of traditional batteries.

Ideal for rugged & harsh environments. Much better than SLA or other lithium’s. -20°F min, +120°F max optimal operating temps (battery performs well down to -20°F). Avoid charging below 32°F.

Standard F2 terminals (6.35mm or 0.25" wide)

20A max continuous, 50A max 300 mS pulse. 9.0V max discharge, 11.0V max recommended discharge. For longest lifetime recommended discharge rate 1-5 Amps. The flat discharge voltage curve provides a 75% bigger capacity than a 10Ah SLA battery.

10A max, 14.4V recommended, 15V max. Please note: this battery should be charged using a LiFePO4 compatible charger. A SLA charger may work, but will reduce performance and lifespan of the battery.

Contains a circuit that handles cell balancing, low voltage cutoff, high voltage cutoff, short circuit protection and high temperature protection for increased performance and longer life.

All batteries are UN38 certified. Dakota Lithium's cells are UL1642 certified and have been tested per IEC62133 standards. Meets all US & International regulations for air, ground, and train transport.

Dakota Lithium is ISO Certified per 9001:2015 standards, and select models are produced in ISO 14001 certified facilities.

This battery should be charged using a LiFePO4 compatible charger. Dakota Lithium 12V batteries should be charged at 14.4 volts, higher than AGM or lead acid. Lead acid chargers will work, but will only charge the battery to 80% of capacity.