How to Wire Batteries in Parallel or Series

Here at Dakota Lithium we pride ourselves on the domestic manufacturing of robust and reliable LiFePO4 batteries. It probably comes as no surprise that we get a lot of battery-related questions.

One of the most common queries is “I need more power! Do you have a battery that can give me more volts or more amps?” The answer is yes. All of our batteries can be connected to produce more power to run bigger motors (voltage – v), or extra capacity (amp hours – Ah). This called wiring a battery in series or in parallel. 

Wiring a battery in series is a way to increase the voltage of a battery. For example if you connect two of our 12 Volt, 10 Ah batteries in series you will create one battery that has 24 Volts and 10 Amp-hours. Since many electric motors in kayaks, bicycles, and scooters run on 24 volts this is a common way of wiring batteries. For example, a number of the pro-bass fisherman that Dakota Lithium sponsors use 36 Volt electric trolling motors (so they can quietly sneak up on fish). They wire 3 of our 170 Ah batteries in series to give them over 17 hours of trolling motor time. That’s enough juice for a week long fishing tournament!

Wiring a battery in parallel is a way to increase the amp hours of a battery (i.e. how long the battery will run on a single charge). For example if you connect two of our 12 V, 10 Ah batteries in parallel you will create one battery that has 12 Volts and 20 Amp-hours. Since many small electric motors, solar panels, RVs, boats, and and most household electronics run on 12 volts this is a common way of creating a battery that will last a super long time. For example, a sailboat captain who does long open water expeditions and needs a long lasting power system wired 80 of our 12 V, 10 Ah batteries in parallel to create an 800 Amp-hour battery. This allows him to run all of his sail boat electronics for up to a month between charges. That’s enough time to sail from San Francisco to Hawaii on a single charge!

“Wait…” some of you might be saying here. “‘Connecting batteries?’ ‘Series or parallel?’ What black magic is this?!”

Well, let’s dig a little deeper into understanding the physics behind the magic. 

For the purposes of this post, we’ll be talking about two different battery metrics: voltage (V) and ampere-hours or amp hours (Ah).

If you think of electricity as water flowing through a system of pipes, voltage is best thought of as water pressure and so is the metric by which we can measure how forcefully electrical current flows. Amps would be the size of the pipe that that water flows through, and thus is the metric by which we measure how much power we can output at a given moment. Amp hours then, in this instance of plumbing analogies, is a measure of how many gallons of water are moving through your pipes over time.

How to Wire A Battery in Series or Parallel 1

I’ve always found this image (and many like it on the internet) to be helpful in explaining electricity.

So, what happens if we connect batteries in series? The newly combine unit’s voltage rating increases. For example, if connecting two of our 12V 10Ah Dakota Lithium batteries in series, what you’ll get is a doubling of voltage or a 24V 10Ah battery pack.

What about connecting a pair of batteries in parallel? The newly combined unit’s ampere-hours rating increases. Using the same two 12V 10Ah Dakota Lithium batteries, what you’ll end up with is a doubling of ampere-hours, or a 12V 20Ah battery pack.

In both cases, adding more Dakota Lithium batteries in series or parallel will simply add on an additional 12V or 10Ah, respectively.

Pretty simple, right? Totally not black magic!

All that being said, it behooves us to mention here that there are 3 considerations that need to be taken into account before wiring batteries up in series or parallel:

  1. Do not connect batteries with different chemistries. For example, don’t attempt to connect SLA batteries with LiFePO4 batteries in series or parallel. Whichever battery quits first (in this instance, it will likely be the SLA battery that dies first) will weigh down the performance of the other(s), and thus give you less use time. If one were to keep using this mix-and-match setup, both batteries would eventually become so unbalanced (more on cell balancing below) that they will essentially become unusable.
  2. It’s also best to use batteries that are identical in voltage and amp hour specs. The easiest way to do this is to simply wire up two (or more) models of the same battery (like our Dakota Lithium 12V 10Ah batteries). Things can get tricky if you’re wiring up batteries that have different battery management system electronics in them, and the permutations for what can happen are fairly wide. Regardless of the differences in those outcomes, you’ll often still end up with wildly unbalanced cells, as in the previous point.
  3. And we recommend using an isolation fuse when wiring in parallel! Even though we have not had any parallel problem reports from our larger batteries, we always advise erring on the side of caution. Thus, we always recommend using a simple isolation fuses for any parallel packs, as a best practice.

So, now that we’ve confirmed that you can indeed connect our batteries in series or parallel, how does one go about doing so? Well, you’re going to need some wires (rated for your specific amperage requirements; we use 14-gauge stranded wires in our ebike kits) with F2 female spade connectors and two (or more) fully charged batteries. The batteries should be fully charged so that the cells are more or less balanced such that it maximizes your overall use time. After all, your parallel or series-wired batteries are only as good as their weakest link and will operate only as long as the least charged cell.

Two Batteries Wired in Series

Two 12V lithium batteries wired in series to make 24 volts

To wire batteries in a series, you will first need to connect the positive ( + ) terminal from Battery A to the ground or “negative” ( – ) terminal of Battery B.

Next, you will need to connect the open positive and negative terminals on Battery A and B to your specific application (e.g. a motor, lights, etc.).

Two 12 volt batteries wired in series to make 24 V

And there you have it! You have a battery connected in series!

Two Batteries Wired in Parallel

Two 12 volt batteries wired in parallel to increase the total amp hours or capacity

As the name implies, parallel connections are pretty straightforward. To start, you will want to connect the batteries’ positive ( + ) terminals to one another.

Next, you’ll want to connect the ground or “negative” ( – ) terminals to one another.

Two 12 volt batteries wired in parallel to increase the total amp hours

And lo! Now you have a battery connected in parallel! You should be able to connect your application to one of the batteries and get all the batteries in parallel to discharge equally, however it is preferred to have your application connected to the positive terminal of one battery and the negative terminal of another. This should help your batteries stay balanced over the long term.

Now that you are a master of magic the possibilities are endless….

You might have a set of batteries wired up in series and parallel now, and if so, great! However, you can also further combine your parallel and series-wired batteries together, again, in either series or parallel. Again using the example of our Dakota Lithium batteries, you could take four batteries to create a large, four-module battery pack that is either 24V 40Ah or 48V 10Ah!



  • Parallel connection attains higher capacity by adding up the total ampere-hour (Ah).
  • Most battery chemistries lend themselves to series and parallel connection. It is important to use the same battery type with equal voltage and capacity (Ah) and never to mix different makes and sizes. A weaker cell would cause an imbalance. This is especially critical in a series configuration because a battery is only as strong as the weakest link in the chain.
  • A weak cell will not affect the voltage but provide a low runtime due to reduced capacity. A shorted cell could cause excessive heat and become a fire hazard. On larger packs a fuse prevents high current by isolating the cell.
  • Observe polarity when charging a secondary cell. Reversed polarity can cause an electrical short, leading to a hazardous condition.
  • Remove fully charged batteries from the charger. A consumer charger may not apply the correct trickle charge when fully charged and the cell can overheat.
  • Charge only at room temperature.
  • Two Batteries in Parallel can use just one Charger
  • Batteries connected in series strings can also be recharged by a single charger having the same nominal charging voltage output as the nominal battery pack voltage.
  • When connecting in Parallel you are doubling the capacity (amp hours) of the battery while maintaining the voltage of one of the individual batteries.

Be The First to Know

Get access to exclusive deals, hear about new products before anyone else, and enjoy tips, tricks, and DIY hacks from our community of experts.